booster pump electric instant water heater Hot water shower installation involves setting up the necessary plumbing and electrical systems to provide a reliable source of hot water for your shower. This typically includes: 1. Planning & Preparation: Identify the best location for the water heater and showerhead, ensuring access to necessary plumbing lines. Determine the type of water heater (tank or tankless) that will be used. 2. Water Heater Installation: If using a tank water heater, it will be placed near the shower, with proper ventilation if needed. A tankless system will be installed closer to the point of use. It will need to be connected to the cold water supply and an electrical source for heating. 3. Plumbing Connections: Install the hot and cold water lines running from the water heater to the shower fixture. These lines must be securely connected to avoid leaks. 4. Shower Fixture Installation: Mount the showerhead, faucet controls, and any additional components, like diverters or temperature control valves. Make sure they are tightly sealed and properly aligned. 5. Testing & Safety: Once everything is connected, the system is tested for leaks and functionality. The temperature of the hot water should be adjusted to a safe level to avoid burns. 6. Finishing Touches: Clean up the work area, and ensure the shower functions smoothly with a steady hot water flow. Professional installation is recommended to ensure safety, especially with electrical and plumbing work. වීඩියෝ එක Like කරන්න Subscribe කරන්න Comment කරන්න Share කරන්න අලුත් වීඩියෝ එකකින් නැවතත් හමු වෙමු. #hotwater #plumbinghacks #plumberwork