Make this beautiful dresser your own by dressing up the front frames and adding your own taste of hardware. This addition can be placed in a bedroom or living area for that always needed extra storage! FREE PROJECT PLAN ▸ Download the free woodworking plan for this project at https://learn.kregtool.com/plans/diy-dresser/ FEATURED CREATOR Thank you to Shara of Woodshop Diaries for partnering with us on this project. Visit her YouTube channel: youtube.com/c/SharaWoodshopDiaries TOOLS USED ▸ Circular Saw ▸ Kreg Rip-Cut ▸ Kreg Accu-Cut ▸ Drill/Driver ▸ Kreg 720 Pocket Hole Jig ▸ Miter Saw ▸ Table Saw (optional) ▸ Brad nailer ▸ Clamps ▸ Kreg Multi-Mark Tool ▸ Kreg Cabinet Hardware Jig (optional) MATERIALS USED ▸ (1 + ½) sheet ¾” plywood ▸ (1) sheet ¼” plywood ▸ (4) 2x2x8 boards ▸ (2) ¼” x 1 ½” x 8’ lattice trim ▸ (2) 1 ¼” tall chair rail molding ▸ (1) 3/8” x ¾” x 8’ half-round molding (optional) ▸ (4) 4” tall furniture feet ▸ (4) furniture feet inserts OR plate brackets ▸ (4) pair 16” ball-bearing drawer slides ▸ (16) 2 ½” pocket hole screws ▸ (78) 1 ¼” pocket hole screws ▸ (11) 1 ¼” wood screws ▸ (8) 2” wood screws ▸ Wood Glue ▸ (14) 1 ¼” brad nails ▸ (48) 5/8” wood screws ▸ (6) knobs/drawer pulls -------------------------------------------------------------------------------- CONNECT WITH KREG ▸ Website: https://www.kregtool.com/ ▸ Facebook: https://www.facebook.com/kregjig/ ▸ Instagram: https://www.instagram.com/kregjig/ ▸ Pinterest: https://www.pinterest.com/kregtool/ ▸ LinkedIn: https://www.linkedin.com/company/kreg-tool-company