Click for more info and reviews of this Redline Trailer Suspension Parts: https://www.etrailer.com/Trailer-Suspension-Parts/Redline/34007-187-00.html Check out some similar Trailer Suspension Parts options: https://www.etrailer.com/dept-pg-Trailer_Suspension_Parts-sf-Suspension_Bolts.aspx https://www.etrailer.com Don’t forget to subscribe! https://www.youtube.com/user/etrailertv Full transcript: https://www.etrailer.com/tv-Demo-Trailer-Leaf-Spring-Suspension-Wet-Bolt-34007-187-00.aspx Jeff Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this suspension wet bolt for 1 3/4 inch double eye springs. Now, this wet bolt will attach your leaf spring to your hanger or your equalizer. As we mentioned, it is designed to fit the 1 3/4 inch wide double eye springs. And when we mention it as being a wet bolt, the wet bolt design is the one that has the grease zerk fitting on this one end, which allows you to attach a grease gun to it. Pump grease in to the bolt and it'll go through the bolt and come out this hole right here. And it lubricates the bushing to prevent any wear. Few dimensions on this or measurements, we're gonna give you the overall length and we're gonna measure from the tip of the grease zerk fitting to the very end of the other. So, we're gonna be right at 3 5/8 inches overall length. Usable length, which would be from under the head to just before the thread start, so that's gonna be right at 2 1/4 inches. The bolt diameter is 9/16 of an inch. The thread diameter down here is 7/16 of an inch and it has 20 threads on it. And this is for a quantity of one bolt. But that should do it for the review on this suspension wet bolt for the 1 3/4 inch double eye springs..