Click for more info and reviews of this MORryde Trailer Suspension Parts: https://www.etrailer.com/Trailer-Suspension-Parts/MORryde/MR92HR.html Check out some similar Trailer Suspension Parts options: https://www.etrailer.com/dept-pg-Trailer_Suspension_Parts-sf-Suspension_Bolts.aspx https://www.etrailer.com Don’t forget to subscribe! https://www.youtube.com/user/etrailertv Full transcript: https://www.etrailer.com/tv-Demo-MORryde-Trailer-Suspension-Parts-Suspension-Bolts-Wet-Bolt-MR92HR.aspx Hello, neighbors. It's Steven here with etrailer.com. Today we're looking at a replacement Wet Shoulder Bolt for your MORryde Suspension Upgrade Kits. So folks, this will replace one, quantity of one, wet shoulder bolt for your MORryde Suspension Upgrade Kits. and it does work with the MORryde Correct Track Suspension Upgrade Kits, the MORryde LRE Leaf Spring Suspension Upgrade Kits, and the MORryde RE Suspension Upgrade Kits. So make sure you check that out on our website to make sure all the different model numbers this fits. So again, it is a simple wet bolt. And it has the grease zerk on there since it's a wet bolt, and you got the port here that the grease comes out. They even put a little single line. You can see that notch there. That line lines up with where the grease is coming out. So when you're putting this in, now you can look at the end and see, "Okay, I know the grease is coming out on this side of the bolt." That way you can orientate it the way you want to or need to for your specific needs. The bolt head is a 13 16ths inch. The thread size down here is a one half inch by 20 fine thread. The thread length, it's nine 16ths inches long. The bolt itself is nine 16ths thick. And overall, from under the head out to the end, is two and 15 16ths inch long. So once again, folks, a nice replacement Wet Shoulder Bolt for your MORryde Suspension Upgrade Kits. I'm Steven. Thanks so much for watching, folks. Stay safe out there as always. .