Click for more info and reviews of this TruRyde Trailer Suspension Parts: https://www.etrailer.com/Trailer-Suspension-Parts/TruRyde/TRSL225.html Check out some similar Trailer Suspension Parts options: https://www.etrailer.com/dept-pg-Trailer_Suspension_Parts-sf-Shackle_Links.aspx https://www.etrailer.com Don’t forget to subscribe! https://www.youtube.com/user/etrailertv Full transcript: https://www.etrailer.com/tv-Demo-TruRyde-Trailer-Leaf-Spring-Suspension-Shackle-Links-TRSL225.aspx Hello everybody, this is Jeff at etrailer.com. Today, I'm gonna take a look at this 2 1/4-inch long shackle strap. Now this shackle strap will connect your double-eye spring to the rear hangar of your single axle trailer or to the A equalizer of a multi axle trailer. Basically using this, it'll shackle the two components together, instead of bolting them directly. It allows for the necessary pivot of the springs. This is a steel construction. Few specs on this. Now, the length, when we say it's a 2 1/4-inch. It's not the overall length. When they talk about the length on a shackle strap, it's the measurement from the center of this hole to the center of this hole. So if we take our ruler and if we go center to center, you can see there's your 2 1/4-inch measurement. Now, the overall dimension from one end to the other, 3 1/4 inches long, width on it, 1 1/4 inches wide, and 3/16 of an inch thick. And the two bolt holes on here, the diameter of those bolt holes are 9/16 of an inch. But that should do it for the review on the 2 1/4-inch long shackle strap.