EXCLUSIVE NordVPN Deal ➼ https://nordvpn.com/AEJC Grab your EXCLUSIVE NordVPN Deal by going to https://nordvpn.com/AEJC to get a huge discount plus 4 extra months for free with every two-year plan! It’s completely risk free with Nord’s 30 day money-back guarantee! Thank you Nord VPN for sponsoring this report. I will get you a great deal on home solar (or add a quality battery to your existing setup): https://autoexpert.com.au/solar I can also save you thousands on a new car: https://autoexpert.com.au/contact Clean metal matters when you’re welding. But if you use the wrong brake cleaner to get there, you can create something far worse than a dirty weld. Some brake cleaners contain chlorinated solvents like tetrachloroethylene, trichloroethylene, or methylene chloride. They’re effective degreasers — and non-flammable — which sounds ideal in a workshop. Until you add heat. Under welding conditions, these chemicals can break down and form phosgene (carbonyl chloride) — a highly toxic gas responsible for tens of thousands of deaths in World War I. It doesn’t always hit you straight away, either. Symptoms can be delayed, and by the time they show up, the damage is already done. There’s no antidote. Treatment is supportive only. If you weld, fabricate, or work on cars, this is a mistake you can make without realising it — especially if your cleaning and welding happen in the same space. Weld-safe checklist: Use non-chlorinated brake cleaner only If it doesn’t explicitly say non-chlorinated, assume it’s not safe Let all solvents evaporate fully (don’t trust seams, cavities, or porous parts) Final clean with acetone — then let that flash off completely Keep cleaning and welding physically separate If you didn’t clean it yourself, assume it’s contaminated This is not a second-chance scenario. Chlorinated solvents + heat = poison gas. Don’t do it. #welding #mechanic #diy #cars #workshop #safety #fabrication #tools